Quantcast
Jump to content

Recommended Posts

Posted

ok so i just got a ds650 it is bad as* but i want more i ride at the duns alot an don't want no raptor beating me up the hill anything would be a help it has a ron woods cdi supertrap pipe an i think thats it was thinking about putting a new carb an maybe a trubo if i can find someone that has one or that can send me off on the rite foot

Posted

A turbo kit will give massive power gains, but you need to be sure it gets tuned right. Forcing massive amounts of air into an engine can be disasterous if you aren't adding enough fuel. Use your search engine to look up atv turbo kits, find something you like, and then call the manufacturer and talk to someone who knows what they are doing.

  • 3 weeks later...
Posted
A turbo kit will give massive power gains, but you need to be sure it gets tuned right. Forcing massive amounts of air into an engine can be disasterous if you aren't adding enough fuel. Use your search engine to look up atv turbo kits, find something you like, and then call the manufacturer and talk to someone who knows what they are doing.

I agree, Try googling "Ds650 Performance Parts".

Posted

Have a guy up my way who put nos to his ds650. It gave him some power. But, nos can dry things out in a hurry if you hold the button on too long. That will get expensive.

I've seen some hop up kits online, more aggresive cams, big bore kits. All these will help. Just dig out your wallet and go crazy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
    • By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By jhamrick75
      If anyone is having issues with the Mikuni VM24SS carb, I thought I would post what issues I had and how I resolved them.
      Acquired a 93 Bayou 220 that had sat for over 4 years.
      The carb was extremely corroded and pitted and full of leftover fuel.
      Cleaned carb and bowl and was able to get the engine to start.
      Within 30 seconds exhaust would heat up and start to glow red hot.
      Removed carb and recleaned everything, including a second overnight soak.
      Needless to say, after removing the carb for the 5th time and my frustration to the limit I
      realized that my attention had been to the carb body and not to the bowl.
      There is a small brass rod on the bottom of the carb that goes down into the float bowl but is seperated from the main section. I had cleaned that area very well....I had thought.
      ***The corrosion had sealed off the channel that runs from the main bowl section to the small tube section on the side of the float bowl. No amount of carb cleaner was going to get it to budge. So i took a small nail and started to scrape away the corrosion and was eventually able to dislodge enought of the corrosion that carb cleaner would flow through that channel. ***
      I thoroughly cleaned each side of the channel in the float bowl and reinstalled the carb and now the issue of it running lean is gone.
      On a second note the fuel mixture screw was a nightmare to remove as the threads had been corroded and wouldnt let the screw come out. I used a little cutting oil and worked the mixture screw in and out until I was able to push past the corroded threads and completely remove the needle. After a couple passes with a tap to clean the threads it is like new again.
      Hope this helps if you are having a lean running machine.
×
×
  • Create New...