Quantcast
Jump to content

Recommended Posts

Guest All4WheelFun
Posted

Hello,

I only have 415 miles on my 4-wheeler but having a problem. While slowing down in 4-Wheel Mode, in both Low or High gear, the steering pulles to the right....(I can hear and feel something engaging when this happens). This occurs when letting off the gas, just before stopping, and while applying the brakes or not. This does not happen in 2-wheel mode. The tire pressure is equal all the way around. I'm guessing that this is an ADC problem. How do I bleed the ADC? Has anyone else had this problem. Any solutions, or advice in where to start looking? Thanks in advance for any help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By P_syko
      Does the 1987 moto 4 350 have a low oil sensor that kills spark? Or are these too old for that kind of thing? 
    • By Sportsman500guy
      I bought a 1996 Sportsman 500 4x4 about a month ago, and I love it. Unfortunately, I've been experiencing a few problems with the high-range gear. The first problem is that the gear selector will intermittently pop out of high and into neutral. This problem will sometimes occur when starting from a stop and sometimes will also occur while at cruising speed. The last time this happened I stopped and put it back into gear, however, as soon as I tried to throttle the machine would die. I turned it on again with no problems put it back into high and it died again. Once again I turned it on with no problems put it into low instead and it worked fine with no problem. I drove in low down the road slowly for a little and then shifted back into high with no issues. 
         I plan on working on it this weekend and would just like some opinions or feedback from anyone who may have experienced these problems before. I'm very mechanically inclined but im unsure of exactly where to start as this is the first Polaris ATV that I've owned. Any feedback is appreciated and thanks in advance  
    • By DZL1
      Question for you guys. I have a 98 bayou 220 that I picked up cheap cause it's wasn't running. So it's has very low compression. It is getting spark and fuel. 
      What should my next course of action be? Any other tests I should perform or where to start looking?
      Thanks in advance.
    • By Gwbarm
      I finally got around to working on the TRX, this has been an ongoing problem with this machine. This is a machine that we keep on my Fathers property, i dont see it that often, my brother haad it professionally repaired last year and year before same problem, the new starter gears and bypass gears last about a year and the machine is not used that often, he said he was done with it , so i thought i should go take a look. Sure enough the gears were all malled again. 
       

       

      IMG_4910.mov   There is some slack in there but most is taken up by the gear cover,if anyone with history with these machines has had the same problem, let me know your findings. Where i am now im looking for finding replacement honda gears on Ebay and try those. I suspect the original was replaced with aftermarket gears years ago and they just worse quality as the years go by. 
    • By hfrost112
      Hello im new Here im having a no spark issue with my 1987 suzuki lt230e with a no spark condition
×
×
  • Create New...