Quantcast
Jump to content

Winch Wiring Help

molehill84

By molehill84
in Suzuki ATV Forum

 Share

Recommended Posts

molehill84 Apprentice

molehill84

Posted
Posted

I purchased my first ATV last weekend, it is a Suzuki Eiger 4x4 Semi-Automatic. :biggrin:

Along with this I also found a Swisher Plow, Dump Bucket, and Universal Mount for a good price. :cool:

The final piece I bought was a Warn Winch (XT25).

My question is:

Does anyone have pictures of how they routed the wires from the winch to the contactor and then to the battery???

Of course you cannot run them anywhere that will come close to the hot engine or where moving parts may pinch the wires.

molehill84 Apprentice

molehill84

Posted
  • Author
Posted

Last night I picked up some liquid electrical tape to protect all the contacts from the elements and a bunch of zip-ties to make sure the wires are secure...

Anyone have any pictures out there of how they routed their wires from their winch back to the contactor and to the battery???

outlander560 Mentor

outlander560

Posted
Posted

i mounted the winch and just wired it straight back used zip-ties to keep it at the top part of the frame,and i brought it all the way to the back and mounted the contactor to the rear part of the frame... i will post pictures tonight

molehill84 Apprentice

molehill84

Posted
  • Author
Posted

I was thinking about wiring it back to the dry-box all the way in the back...

I'd probably need to get longer wires from the winch to the contactor though.

I don't think the wires that came with the Warn winch will reach the whole way back.

The main thing I'm looking for is pictures showing the route along the frame where you attached the wires.

I would of course like to keep it as far away from the engine as possible.

Thanks for the help!

molehill84 Apprentice

molehill84

Posted
  • Author
Posted

I took off a few of the panels today to get an idea of where I'll run the wires from the winch back to the contactor...It looks like the wires from Warn just might reach back to the dry box!

Any pictures out there???

Also, which wire did you tap into for the handle bar switch?

I know I should use a multi-meter to find a wire that only gets power when the ATV is on...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Tim Keiper
      2 problems with 2000 Timberwolf 4x4
      By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • Tim Keiper
      Winch question?
      By Tim Keiper
      I have a Yamaha Timberwolf 4x4 250. I want to put a winch on it, but just wondering if the charging system will handle it or not ? Has anyone added one to their machine and have you had any issues?
    • AnthonyT
      First time ATV buyer
      By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • 1998Zuki250
      Favorite ATV Tires?
      By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • Ajmboy
      ATV Snow Plow Review, Best ATV & UTV Snow Plows
      By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...