Quantcast
Jump to content

Recommended Posts

Posted

Can anyone tell me which crank and rod to go with on my 05 yfz 450. Rod is bad in mine and want to upgrade to 06 but I don't want OEM. Thinking of WR crank with falicon rod. Is this a good decision?

Posted (edited)

Hot Rods is made by Wiseco, definately a quality product. By the way, I merged this thread into your original crankshaft thread since they were so similar, and added the year make and model to the title, please remember to add that info to the title when you start a new thread, it helps direct web searches to our site.

Edited by DirtDemon
Posted

I"ll let you know how it turns out. I have decided to go with the WR crank and falicon "knife" rod. the crank is one pound lighter than oem and I called a tech with hot rod cranks and he told me that theirs are a little heavier than oem. I know of two other yfz's with the same crank and rod that i'm getting and they both rev like two strokes. I'll definitely know how it turns out.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
    • By Arizona
      I recently bought a 87 TRX 250 not running of course, the owner had a brand new Key Switch on it.
      I think it is the wrong one or wrong wire colors as the colors dont match up with wiring diagram i downloaded for it. 
      anyone have a pic of their ign switch wires where they connect with the wire colors for that model? I ended up leaving the black/w stripe and
      green wire disconnected in order to hot wire it for other testing but would like to know as the colors dont match diagram. 


    • By pastorjeep
      Ok guys, I am a glutton for punishment! I picked up this 01 2wd Rancher because the plastics looked good on the marketplace. It has been sitting in the guys back yard for 10 years. The original engine blew and they swapped in an electric shift 4x4 engine. 😒The engine is locked up and was full of water. The wiring is hacked where they tried to get it to run and the rear end needs new swingarm bearings where they left it laying on the ground in the woods for 10 years. Has anyone here ever did the engine swap? First thing is to straighten out the wiring and get the engine free to see if I can get it to crank over. I have swingarm bearings ordered and a new ignition switch. So hopefully I can at least roll it around soon. 🤣





    • By bigd764
      Anyone know what this thing is ?





    • By Coyote251
      View File 2016 Can-Am Outlander 570, 650 & 850 L-Series service manual
      service manual - 2016 Can-Am Outlander L-Series
      2016 Can-Am Outlander 570, 650 & 850 Standard Series Here is combined the base manual along with all the needed updates and the 2016 supplement manual into one manual
      Submitter Coyote251 Submitted 01/03/2025 Category Can-Am BRP ATV  
×
×
  • Create New...