Quantcast
Jump to content

Recommended Posts

Posted (edited)

I'm sure you have all wondered about snorkels on your ATV and I have finally went for it and made dual snorkels for my ATV.

My quad, like most, comes with a factory snorkel So I removed that and put some 1.5" PVC out of it with two 45 degrees to get around the engine like so:

0419091947.jpg

0420091751.jpg

Then I continued off of that with a straight piece going by the engine and into the fender

0420091751a.jpg

then in the fender I used 3 90 degrees to clear make sure the wheel never rubs on it.

0420091751b.jpg

I dont have a good pic but I used a T pipe at the top part to split it into a dual snorkel (I had a single but the dual made a difference by giving it all the airflow it needed)

Here is a picture of the whole assembly if you are having trouble visualizing it

0424092127.jpg

After all that I painted the PVC black then used clear tubing (refrigerator water line) to extend the factory vent lines from the rear drum and differential. This is very important...

here are some finished pictures (I dont have any from the OHV park but they have passed the creak test :D)

Edited by Spooge
Posted

hey its been a while... atv has changed a lot i see u got a k&n and some itps in the rear...if ur going to go through some deep stuff, switch out those mudlites for some highlifter outlaws...o and with that snorkel u didnt have to rejet? anyway great job.. and did u put di-electric grease on all your electric connections??

Posted

Im plenty happy with my mudlites especially with the mixed terrain I ride on.. and I didnt modify the engine at all for the snorkels.

And yes, before winter I greased all of the connections... funny story, before I got the mudlites I got stuck in deep water and my winch was able to pull me 20 feet to the shore... while completely submerged!

  • 6 months later...
Posted

Sweet snorkel setup. I was wondering how easy it would be to do this. Is it recommended that you also do the vent lines when you do this? I saw yours attached to the snorkels.

Thanks!

Posted

I was able to make and install these snorkels in one day so its not a very difficult project and yes you do want to extend your vent lines so you dont get water in your brakes (first line) or in your differential (second line) and mixed in with the diff fluid

  • 3 weeks later...
Posted
Very nice set up...do you have any pictures of your quad submerged?

the last thing I wanted to do was snap pictures in that situation hahaha, but I did take a pic after I got home...

3212_1053487462395_1382041522_1863831_6312372_n.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By Panupong Pradchaphet
      I have a Sportsman 450 HO and almost killed my self when loading it on my truck with ramps.  It rolled off the top of the ramps and tailgate and nearly landed on me.  I now want to winch the ATV in to the truck.  My question is are the front side bed tiedowns in my 2011 RAM strong enough to winch to without distorting the hooks or sides of the bed?
×
×
  • Create New...