Quantcast
Jump to content

Recommended Posts

Posted

HI everyone. I ride a raptor 660 2004. I just had a new clutch installed last summer. I didn't ride much the winter but a few times on the ice and mud. So now its spring and i took it out again but i noticed that the clutch isnt catching very well. I hope the new clutch isn't gone, but don't you need to adjust your clutch as you break in your new clutch? Any help would be appreciated thanks!

Posted

You should adjust the cable to reduce free play. There should be a minor adjustment at the lever on the handlebars. If you need a major adjustment, I believe further down the cable there is a an ajustment with lock nuts.

Posted
You should adjust the cable to reduce free play. There should be a minor adjustment at the lever on the handlebars. If you need a major adjustment, I believe further down the cable there is a an ajustment with lock nuts.

Exactly what AJMBOY said. Have you been able to adjust it?

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By qcm413
      Hi,
       
      i need to replace my tire on my atv and i want to know if somebody have a good tire experience on mid-mud terrain and winter plowing. im not sure if i am to go with a tile like a tractor thread or the other ones like ITP mud lite
      thank in advance 
    • By mmikesell
      First post here need some help/advice. I bought a 2001 king quad 300, vin number JSAAK43A212111871. I have been trying to do some basic maintenance as it runs but doesn't idle all that well . I want to take out and clean/repair the  carb but when looking for parts it ask for model X Y K1 K2. How do I know which model I have? I have tried some vin decoders but they haven't told me. If anyone could recommend a carb rebuild kit for my quad Id appreciate it. Also any tips on tracking down an owners manual? 
×
×
  • Create New...