Quantcast
Jump to content

Recommended Posts

  • 3 years later...
  • 9 months later...
  • 3 months later...
Posted

I have been looking for a 400ex engine or a mid 80s yz250 engine and finding killer deals but nothing in my try-state near IN ther is a 400ex on ebay right now it's stock and used for $300 but it would b nice to b able to deal face to face if I could without driving over 300 miles

Posted

What state are you located in and why 400ex or 250 since there such different motors? Do you have anything to trade or you looking at straight cash payment

Posted (edited)

I live in Indianapolis looking to bye with cash and my quad is a 2003 400ex I would like to put the right engine on it but I put in the part about the mid 80s 1983 - 1985 250 yz 250 or 1998 cr 250 because I have a few top-ends that have been ported for alcohol and used on a micro-sprint I used to race I would need a good bottom-end because the clutch was cut off and flywheel was welded and the kick start removed for use in the micro-sprint I was thinking of maybe building a 250 2 stroke and retrofitting it on there Its close in power to weight ratio and I thank it might fit I have over 10 years of part fabrication

getting the exhaust pipe to fit right might b tricky but engine mounts are easy

Edited by Jonah27j
  • 4 weeks later...
  • 5 months later...
Posted

I need a motor for a 07 400ex bought from a guy that ran with no oil and fried the motor I have 50 dollars invested and took to the shop and was gonna be over 3000 to rebuild so not wanting to do that if anybody has one they would like to get rid of I'm in desperate need of it

  • 4 years later...
Posted
3 hours ago, Frank Angerano said:

I looked on eBay there are a few up for grabs anywhere from $399 to $900.  Is the old engine completely gone ? Can’t rebuild ? 

I looked on there and they are mostly like 900. If u see one for 500 or less let send me url. Yes I got old engine but I think it's cheaper to get new one. Pistons came out the side of trans case

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Trent Finnessey
      I’ve got a 2000 400ex with a dg slip on muffler, it came with he stock muffler on it but the previous owner had the dg in a box so I put it on. I’ve been riding it for the past month and a half and every time I let off it backfires, and the other day the backfires got way louder, 2x louder! I’m concerned that I may hurt my motor? Why does is backfire??? Thanks
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...