Quantcast
Jump to content

Recommended Posts

Posted

I have been riding ATV's for years, but mostly for hunting and general utility and stuff like that . Last summer I went on a mudride at one of these places that holds these all weekend things, and I am hooked! I want to be more informed on how things work, and just learn in general the dos and donts of mudding. some of these may sound a bit silly, but here goes:

1. How does a snorkel work?

2. If I stall with my pipe underwater, is that going to kill my ATV?

3. Will it stall if the pipe is underwater with a snorkel?

Any information is greatly appreciated. . . . I am crazy about this, but even more crazy about making sure I dont have to fix my quad when I could have prevented it.

Posted
I have been riding ATV's for years, but mostly for hunting and general utility and stuff like that . Last summer I went on a mudride at one of these places that holds these all weekend things, and I am hooked! I want to be more informed on how things work, and just learn in general the dos and donts of mudding. some of these may sound a bit silly, but here goes:

1. How does a snorkel work?

2. If I stall with my pipe underwater, is that going to kill my ATV?

3. Will it stall if the pipe is underwater with a snorkel?

Any information is greatly appreciated. . . . I am crazy about this, but even more crazy about making sure I dont have to fix my quad when I could have prevented it.

1.A snorkel works by sealing the air box completely so no water can get into the box. You then add air tubes that sit well above the handle bars. The point of this is you are sucking in air from up above the hand controls. The purpose of that is to allow your quad to go into deeper stuff without sucking air into the motor.

2.No you will not kill the motor from the exhaust going under water.

3.It shouldn't stall from it either, as long as your snorkels are getting the fresh air needed. The exhaust will be like a straw in chocolate milk!

Posted (edited)

well ill help with what i can a snorkel is an extention of you air intake witch will let you run in deeper water completely under water as long as all you electrical connections are sealed most are i always put silicon on all my connections anyway and yes it will run with the pipe under water but as for it stalling under water im not sure i would definitely let the bike float up some so the exhaust is out of the water before cranking it over but im sure someone else will jumb in and help me out with that answer you dont realy have to worry about destroying you engine i mean if you did get a lot of water in it you would have to get it all out before running it obviously (change oil,ext.)

i ride mostly sport bikes (non 4x4) but i have had them under water for short periods many times and never had any problems besides with electrical connections thats why i started using silicon on my connections

anyway im sure will get some better answers from some other members ther are a lot of knowlagble people on this site

Wecome to Quad Crazy this is a great site !!!!!!

well stoopidbot1 jumped in front of me wHile i was typing so know my reply sounds silly haha!!!!!!!!!!!!!!!!!!!!!!!

Edited by Havok
Posted

Thanks, I appreciate all of the answers, this will really help me out a lot. when my exhaust would go under water before I would just stay on the gas for fear that if i let off it would stall out the motor and get water into my engine. Wasn't sure how the snorkel worked, and couldnt find snorkels for dummies anywhere on the internet.

Posted
WOW!!!!!!!!!!! You actually want to put your Ride in that STUFF!!!!!!!!!!!!!!!

Come on going in the mud with a ATV is fun. My ATV just loves the mud without a snorkel.:wink:

attachment.php?attachmentid=330&stc=1&d=1231701974

.

.

couldnt find snorkels for dummies anywhere on the internet.

Haha..

.

.

4095_view.jpg

4095_view.jpg.46d4d141c9de6f35d8f87a0f841952de.jpg

Posted (edited)

wat kinda atv do u have?? ur prob gunna have to make ur own snorkel and u can build it with normal pvc pipe or pool hose and make sure ur sealed water tight with plumbers glue.. wen and if u do snorkel u have to jet ur atv's carburetor because the fresh air is being forced into ur airfilter and u have to adjust it so the gas and air flow has not to much of one and not to little of the other causing ur to loose power and bog down

even if ur atv is under water the fact that the engine is running will keep the water out of the exhaust no matter if u have ur thumb off the gas if u are worried about water going into u exhaut build a pipe that attaches to ur exhaust in fact hmf makes one if u want to buy it.. thats one problem the other is ur clutch snorkels the one that come with ur atv stock if u were to get water in those it will get into ur belt housing and cause ur belt to slip which would lead to u burning up ur belt

if u do sink it in the water wen u take it out of the water ur going to have to change ur oil... i have heard from a lot of ppl that u take out ur spark plug and pour a little diesel fuel down it and just crank it with out the spark plug in and it will take out the water... or another remedy is just pouring some oil down it and just keep pouring it until u get oil without water in it

DI-ELECTRIC all ur connections and spark plug it will keep everything a-ok and water wont be a problem

Edited by outlander560
Posted

I have a 2007 king quad. . . it is fuel injected. I had it snorkeled this week by a guy who does it for a lot of guys locally, he has a good reputation so I looked at some of his work and decided to do it. I had it in the mud as you can see from my profile pic and I am happy with the work he did for me. I mainly just wanted to get a good understanding of how it works that way I will know if something breaks, or how to do the riding when the mud gets thick or deep.

Posted

so far just the wheels, snorkel, and pipe. im savin up for the swamp series HMF, and a power commander. that will be my next purchase. I actually have an HMF on it right now that is too loud for my taste, I am trying to find someone who wants to trade it for a stock pipe. I got rid of mine like an idiot when I got the HMF.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
    • By mywifeknowseverythin
      For those of you who are into coffee, I found this little article that might interest some of you.

      I admit it. I am a coffee snob. I try not to be obnoxious about it, but let the record show: I enjoy a really great cup of coffee. But pay $4 a cup for it? No way. Even snobs have their limits.
      Over the years, I’ve learned that a really good cup of coffee has less to do with money and more to do with knowledge and care. In fact—and this is the amazing thing—the more I learn, the less I spend.
      BEANS. Purchase whole bean coffee as soon after it has been roasted as possible. Freshness is the key to a superb cup of coffee. Purchase in small amounts—only as much as you can use within 2 weeks of being roasted.
      RATIO. The perfect ratio of coffee beans (prior to grinding) and water is: One-half cup whole beans to 8 cups of water.
      GRIND. Grind your beans as close to brew time as possible. A burr or mill grinder that crushes the beans is preferable to a blade grinder that cuts them. Once ground, coffee should be used immediately.
      WATER. If your water is highly chlorinated use bottled or filtered water. It must be right at 200 F, just short of boiling temperature, when it hits the dry grinds. This is critical to creating a great cup of coffee. Consume immediately.
      STORE. The enemies of roasted coffee beans are air, moisture, heat and light—in that order. Keep your beans in an airtight container that is not close to moisture (sink, dishwasher), heat (oven, stove) or light (countertop). Do not store your daily coffee in the refrigerator or freezer because contact with moisture causes it to deteriorate. For larger quantities of roasted beans that you cannot use within 2 weeks, wrap in airtight bags and store for up to a month in the freezer—making sure the beans are completely protected against moisture. Once removed from the freezer, do not return.
      BUY. Most supermarkets offer high-quality, roasted coffee beans for $.60 to $1 per ounce ($9.50 - $16.00 per pound). Ouch! Discount warehouse clubs like Costco, Sam’s and B.J.’s have considerably less expensive coffee at about $9 a pound for name brands like Starbuck’s and Peet’s. Still, that’s too rich for my blood.
      ROAST. I roast my own coffee for two reasons: It is infinitely better tasting and half the price. I purchase green coffee beans by mail order for about $4 - $6 a pound, depending on current conditions and variety. I started out roasting in a popcorn popper (West Bend’s Poppery II is ideal) and have graduated to a small coffee roaster. My favorite resource for everything from roasting instructions to green coffee beans is http://www.u-roast-em.com/. Owner Jim Cameron has a wealth of knowledge and is anxious to share.
      You won’t believe how easy it is to roast coffee. And enjoyable, too. I roast only one-week’s worth at a time—about twenty minutes. Green coffee beans have an indefinite, useful shelf life of at least a year, and probably two or longer. But I’ll never know. Coffee beans just don’t last that long around my house!
    • By quadcrazy
      View File 1985 - 1995 Polaris ATV service manual (All Models)
      1985 - 1995 Polaris ATV service manual (All Models) 
      Covers the following models:
      1985   Scrambler Trail Boss
      1986   Scrambler
      1986   Trail Boss
      1986   Scrambler
      1986   Trail Boss
      1987   Trail Boss
      1987   Cyclone
      1987   Trail Boss 4x4
      1987   Trail Boss 4x4
      1987   Trail Boss 4x4
      1988   Trail Boss 2x4
      1988   Trail Boss 4x4
      1988   Trail Boss 250 RIES
      1988   Trail Boss 250 RIES
      1989   Trail Boss
      1989   Trail Boss 2x4
      1989   Trail Boss 4x4
      1989   Big Boss 4x6
      1989   Big Boss 4x6
      1990   Trail Blazer
      1990   Trail Boss 250
      1990   Trail Boss 2x4
      1990   Trail Boss 2x4 350L
      1990   Trail Boss 4x4
      1990   Trail Boss 4x4 350L
      1990   Big Boss 4x6
      1991   Trail Blazer
      1991   Trail Boss 250
      1991   Trail Boss 2x4
      1991   Trail Boss 2x4 350L
      1991   Trail Boss 4x4
      1991   Trail Boss 4x4 350L
      1991   Big Boss 4x6
      1991   Big Boss 6x6
      1992   Trail Blazer
      1992   Trail Boss 250
      1992   Trail Boss 2x4
      1992   Trail Boss 2x4 350L
      1992   Trail Boss 4x4
      1992   Trail Boss 4x4 350L
      1992   Big Boss 4x6
      1992   Big Boss 6x6
      1993   2502x4
      1993   3502x4
      1993   2504x4
      1993   3504x4
      1993   Sportsman
      1993   2506x6
      1993   3506x6
      1993   Trail Boss
      1993   Trail Blazer
      1994   3002x4
      1994   4002x4
      1994   3004x4
      1994   4004x4
      1994   3006x6
      1994   4006x6
      1994   Trail Boss 2W
      1994   Trail Blazer 2W
      1994   Sportsman 4x4
      1994   Sport
      1995   3002x4
      1995   4002x4
      1995   3004x4
      1995   Xplorer4x4
      1995   4006x6
      1995   Trail Boss
      1995   Trail Blazer
      1995   Sportsman 4x4
      1995   Scrambler
      1995   Magnum 2x4
      1995   Magnum 4x4
      1995   Sport
      Submitter quadcrazy Submitted 05/24/2018 Category Polaris ATV  
    • By Winnem
      Hello fellow atv riders. I'm looking for people with experience with TGB atv. 
×
×
  • Create New...