Quantcast
Jump to content

Recommended Posts

Posted

I am going to look at a 1998 Blaster this evening for my son. I was wondering if any of you Blaster or previous Blaster owners knew of anything special that I should ask or look for? I know the obvious 2 stroke stuff. Here is the ad from Craglist1998 yamaha 200 blaster

Wish me luck!

Thanks in advanced

Scott:wink::wink:

Posted

i wuld suggest a hydrolic rear disk conversion. very good compared to the brakes on the blaster. i would look into rebuilding the carbourator(i found a kit for $15) also buy spark plugs, if you even attepmt going at an incline you will screw up your plug, trust me. 3 months of constant tearing apart isnt worth $3

Posted
i wuld suggest a hydrolic rear disk conversion. very good compared to the brakes on the blaster. i would look into rebuilding the carbourator(i found a kit for $15) also buy spark plugs, if you even attepmt going at an incline you will screw up your plug, trust me. 3 months of constant tearing apart isnt worth $3

You were fowling plugs, You can't drop a 2 stroke into low RPMs to lug it up a hill. You have to make that thing SCREAM!:aargh:

Posted

Well we got it. I can't believe I bought it with out starting it but it seems that the carb problems are worst than I thought. We are getting any gas through the carb it appears. I think the compression is a little low too. I will have to get a compression tester on it. It has a full Graydon Proline exhaust on it. It has been bored but we don't know how much. Tires are in good shape and it has a new set of bars on it. I did manage to get it for $350 dollars though. I am going to take the carb off tomorrow and see what I can find out.

Posted

Well bad news is we have to rebuild it. Compression is down to 50 psi. The carb is not in too good a shape either. I am looking on Ebay to find a carb and maybe the rest of it too.

  • 2 weeks later...
Posted

Sound like a great project... even if it does need some work you can ususlly find blaster parts pretty cheap, even aftermarket stuff... how old is you son? is this his first ride?

have fun and good luck

Posted

My son is 14 and no he is graduating from a Polaris Predator 90. I am picking some stuff up. I need to sell his to get the money to do the majority of the work but I will be pulling it down this weekend to see what the inside of the cylinder looks like.

Posted
My son is 14 and no he is graduating from a Polaris Predator 90. I am picking some stuff up. I need to sell his to get the money to do the majority of the work but I will be pulling it down this weekend to see what the inside of the cylinder looks like.

Good luck with that. Take some pictures and post them up...:biggrin:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      This topic is being opened to discuss the feasibility of forced induction on small engines.
    • By hfrost112
      Hello im new Here im having a no spark issue with my 1987 suzuki lt230e with a no spark condition
    • By Eisaks777
      hello, i have bpr bombaradier rally 200 2007 which has a lot of gasoline in the oil sump, it is  4 stroke. Has anybody had problem like this and which can be the cause and how to fix it. i rode it today at -2 degrees celcius if it helps.

    • By mywifeknowseverythin
      For those of you who are into coffee, I found this little article that might interest some of you.

      I admit it. I am a coffee snob. I try not to be obnoxious about it, but let the record show: I enjoy a really great cup of coffee. But pay $4 a cup for it? No way. Even snobs have their limits.
      Over the years, I’ve learned that a really good cup of coffee has less to do with money and more to do with knowledge and care. In fact—and this is the amazing thing—the more I learn, the less I spend.
      BEANS. Purchase whole bean coffee as soon after it has been roasted as possible. Freshness is the key to a superb cup of coffee. Purchase in small amounts—only as much as you can use within 2 weeks of being roasted.
      RATIO. The perfect ratio of coffee beans (prior to grinding) and water is: One-half cup whole beans to 8 cups of water.
      GRIND. Grind your beans as close to brew time as possible. A burr or mill grinder that crushes the beans is preferable to a blade grinder that cuts them. Once ground, coffee should be used immediately.
      WATER. If your water is highly chlorinated use bottled or filtered water. It must be right at 200 F, just short of boiling temperature, when it hits the dry grinds. This is critical to creating a great cup of coffee. Consume immediately.
      STORE. The enemies of roasted coffee beans are air, moisture, heat and light—in that order. Keep your beans in an airtight container that is not close to moisture (sink, dishwasher), heat (oven, stove) or light (countertop). Do not store your daily coffee in the refrigerator or freezer because contact with moisture causes it to deteriorate. For larger quantities of roasted beans that you cannot use within 2 weeks, wrap in airtight bags and store for up to a month in the freezer—making sure the beans are completely protected against moisture. Once removed from the freezer, do not return.
      BUY. Most supermarkets offer high-quality, roasted coffee beans for $.60 to $1 per ounce ($9.50 - $16.00 per pound). Ouch! Discount warehouse clubs like Costco, Sam’s and B.J.’s have considerably less expensive coffee at about $9 a pound for name brands like Starbuck’s and Peet’s. Still, that’s too rich for my blood.
      ROAST. I roast my own coffee for two reasons: It is infinitely better tasting and half the price. I purchase green coffee beans by mail order for about $4 - $6 a pound, depending on current conditions and variety. I started out roasting in a popcorn popper (West Bend’s Poppery II is ideal) and have graduated to a small coffee roaster. My favorite resource for everything from roasting instructions to green coffee beans is http://www.u-roast-em.com/. Owner Jim Cameron has a wealth of knowledge and is anxious to share.
      You won’t believe how easy it is to roast coffee. And enjoyable, too. I roast only one-week’s worth at a time—about twenty minutes. Green coffee beans have an indefinite, useful shelf life of at least a year, and probably two or longer. But I’ll never know. Coffee beans just don’t last that long around my house!
    • By Winnem
      Hello fellow atv riders. I'm looking for people with experience with TGB atv. 
×
×
  • Create New...