Quantcast
Jump to content

Arctic Cat 650 Prowler bent tie rods

hewestsr

By hewestsr
in Arctic Cat UTV Forum

 Share

Recommended Posts

hewestsr Newbie

hewestsr

Posted
Posted

We have bent so many tie rods on the prowler we started carrying spear ones ,,:aargh:,, we have 4 650 prowlers ,,, but I have come up with a way to fix them, ,,, I took a piece of pipe and bored it out on one end to fit threaded end and other to fit tie rod and welded them to the nut ,, I have several extra ones made up if any one is interested ,,,, it beats walking 20 miles back to the truck [email protected]

  • 1 month later...
  • 4 months later...
  • 2 months later...
swampcat07 Grand Master

swampcat07

Posted
Posted

I myself love to fab stuff myself but a local aftermarket company makes Arctic Cat Heavy Duty Tie Rods which are made from 3/4" SCH. 80 pipe and utilize 1/2" chromoly hiem joints. Nothing special about the pipe but the hiem joints are a great idea.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Coyote251
      2008 Brute Force 650, clutch is slow to engage
      By Coyote251
      I'm trying to help a buddy out with his bike (he's not really on the internet or familiar with these forums) and I'll admit that I am not super familiar with the transmission and clutches in these bikes. I owned a Brute a few years ago, but never had an issue like this that I had to troubleshoot.
      So basically my buddy bought a group lot of 650's to build one good bike out of. He got it all put together and has it running but when he pushes on the throttle the clutch doesn't engage till the RPM's are quite high and even when its moving it doesn't really speed up, almost seems like its in "limp mode". He's tried 2 different transmissions so I don't think that's the problem. 
      Is there any adjustment on the clutch engagement? Anything else I can tell him to look at? Let me know if you need anymore information if you think you can help.  
    • Eisaks777
      bpr bombaradier rally 200 2007 a lot of gasoline in the oil sump 4 stroke, what is the problem and how to fix it
      By Eisaks777
      hello, i have bpr bombaradier rally 200 2007 which has a lot of gasoline in the oil sump, it is  4 stroke. Has anybody had problem like this and which can be the cause and how to fix it. i rode it today at -2 degrees celcius if it helps.

    • marcosphoto
      Quest 500 (apparantly not the same as 650 according to manuals and photos)
      By marcosphoto
      Hi folks, a little disparity brought me to this forum.  To set the stage, I'm a 35 auto tech in the industry 37 years now.  Licensed motorcycle tech also, 20+ years.  I race superbike and motocross.  Always done most of my own standard work (outside of specific race machine works) including building my own race bike engines.  Now that skills are out of the way, onwards and upwards. 
      Helping a neighbor with his old quest 500, right front axle seal leak.  Well, looks like everything else - right?  Wrong!  Initially I noticed the CV joint was lacking large lands to place prybars on to pop it out, rather a thin shield like ring very close to the diff seal.  Knowing the ring appeared quite delicate, I only pried gently and the CV popped out.  However this is where things get weird.  Came out only around 7-9mm then hung up again, felt like the clip was catching inside the diff.  So spun and pulled, spun and pulled until I was blue in the face but no success getting it out.  Also while it was out, I could see that the delicate ring around the outer circumference of the joint was actually the sealing surface where the seal contacts, instead of the norm where the seal rubs inside the diff much deeper and stays cleaner.  I've never seen a joint like this, also the service manuals photos which apply to 650 also reflected a standard joint I am accustomed to rather than this one I was fighting with.  Rather than break something in the diff, I decided to stop while I was ahead and reassemble the machine before something broke.  (The joint would pop in and out of place easy enough, just wouldn't slide out further than 7-9mm).  While the joint was a little out and sealing surface exposed, I cleaned the seal and sealing surfaces clean as possible before putting back together.  Seems to be holding for now, but eventually I'm sure the leak will come back.  Any thoughts as to why that CV joint just refused to come all the way out?
    • Coyote251
      2016 Can-Am Outlander 570, 650 & 850 L-Series Service Manual
      By Coyote251
      View File 2016 Can-Am Outlander 570, 650 & 850 L-Series service manual
      service manual - 2016 Can-Am Outlander L-Series
      2016 Can-Am Outlander 570, 650 & 850 Standard Series Here is combined the base manual along with all the needed updates and the 2016 supplement manual into one manual
      Submitter Coyote251 Submitted 01/03/2025 Category Can-Am BRP ATV  
    • Chucksta
      What would make it surge the one tire? King Quad 300 "97
      By Chucksta
      So.. it a weird one.. The quad surges as you go down the road. By the looks of my tracks, it's one wheel only. High range, low range, 2 wd , 4 wd.. It just doesn't matter.. 
      You can see in the pictures the marks it leaves. That was in a straight line, with hardly any acceleration. 
      Any ideas?



COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...