Quantcast
Jump to content

Recommended Posts

Posted

They look like some quality products. This is what I found on them just real quick.

Each and every system is designed to increase power, add acceleration and throttle response, reduce weight and offer a new deeper throatier sound. We try to keep sound levels to a minimum without sacrificing any power or performance. We also try to keep all of our systems at or below a 96 sound decibel reading. Each kit comes with installation instructions, proper mounting hardware and proper jetting for summer riding at sea level if changes are needed. Most kits come with a jet chart as well. Our technical department can give you proper jetting specs for custom applications as well. With all full exhaust kits we also suggest the use of one our clutch kits to ensure that the machine is operating at it’s suggested rpm with the new exhaust system installed.

Posted

alright cool... if i do jet it for the exhaust do u think i can switch it back to stock exhaust wen i go to the atv park up here because he only allows stock exhausts?? or would have to change the jetting back to stock also

Posted

thanks but i already had the stuff in that kit... just curious about the exhaust.. i cant have a loud exhaust....but i wanted to know if any of u guys have this exhaust?? or have a friend an/or family member who has this exhaust??

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Travis_Smith
      I have a 2002 Kawasaki Prairie KVF 400 and im trying to figure out the actual float height... i have read 17mm +- 2mm, seen 13mm and 23mm... what is happening is it will start right up, rev a little and all is fine, when it warms and you put a load on it bogs down and sputters. no i don't have a manual
    • By KSIM
      View File CFMOTO C-Force 400 service manual
      C-Force 400
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
    • By Kawasakibayounospark
      any one know much about how this system works. Replaced voltage regulator cid box coil pickup coil have power to cid box none out to coil any thoughts. This is cid box number three 
    • By mans
      Were is the neutral safety switch on 03' Kodiak 400 4x4 . How xan i check it to see if it's good for a no neutral light no power to machine. Ty
×
×
  • Create New...