Quantcast
Jump to content

Recommended Posts

ok so ive been talkin to some ppl with these rev boxs and they say its a quick, easy, and worth buying upgrade.

heres the one im thinkin about buyin...

eBay Motors: AMR STAGE 2 REV BOX HONDA TRX 400EX IGNITION 400 CDI (item 370064886695 end time Aug-28-08 16:57:54 PDT)

i was talkin to my buddy about it and he said it would eventually blow the engine(i kno bullshitt right?). i said i wouldnt think so, unless i held it wide open for a prolonged amount of time. but my question is, could this rev box possibly blow my engine? im tryin to make my quad as fast as possible without taking away the 400ex's well known reliability.

and another question wat stage should i get? stage 2 or 3? remeber my quad is stock

thanks alot guys

Link to comment
Share on other sites

ok so ive been talkin to some ppl with these rev boxs and they say its a quick, easy, and worth buying upgrade.

heres the one im thinkin about buyin...

eBay Motors: AMR STAGE 2 REV BOX HONDA TRX 400EX IGNITION 400 CDI (item 370064886695 end time Aug-28-08 16:57:54 PDT)

i was talkin to my buddy about it and he said it would eventually blow the engine(i kno bullshitt right?). i said i wouldnt think so, unless i held it wide open for a prolonged amount of time. but my question is, could this rev box possibly blow my engine? im tryin to make my quad as fast as possible without taking away the 400ex's well known reliability.

and another question wat stage should i get? stage 2 or 3? remeber my quad is stock

thanks alot guys

i really dont see how it can blow your engine.....:no:

Link to comment
Share on other sites

No, it won't. If you get the stage 3, possibly. Just for comparison, On the Rhino the stage 2 increases from the stock 6800RPMs to 7800RPMs. The Stage 3 raises it to 9000. With stock internals you that is too high of reving. The stage 2 SHOULDN'T give you any problems. Stage 3 is for people that have crazy after markets done inside.

Link to comment
Share on other sites

No, it won't. If you get the stage 3, possibly. Just for comparison, On the Rhino the stage 2 increases from the stock 6800RPMs to 7800RPMs. The Stage 3 raises it to 9000. With stock internals you that is too high of reving. The stage 2 SHOULDN'T give you any problems. Stage 3 is for people that have crazy after markets done inside.

wow 9000 rpms would blow my engine in a flash:yes:

Link to comment
Share on other sites

  • 2 weeks later...
I have a big gun Rev Box in my raptor. Ya it does a fair amount of pep to your ride. Ya its quick and easy to install. It took me about 10 seconds to install, make sure that yours is reaady to snap in and you don't have to mess with any wires unless you are comfortable with that kind of stuff...

Good advise, most of the CDI boxes are plug and play.

Link to comment
Share on other sites

I have a big gun Rev Box in my raptor. Ya it does a fair amount of pep to your ride. Ya its quick and easy to install. It took me about 10 seconds to install, make sure that yours is reaady to snap in and you don't have to mess with any wires unless you are comfortable with that kind of stuff...

is it a 350/660/700

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Arizona
      I recently bought a 87 TRX 250 not running of course, the owner had a brand new Key Switch on it.
      I think it is the wrong one or wrong wire colors as the colors dont match up with wiring diagram i downloaded for it. 
      anyone have a pic of their ign switch wires where they connect with the wire colors for that model? I ended up leaving the black/w stripe and
      green wire disconnected in order to hot wire it for other testing but would like to know as the colors dont match diagram. 


    • By lester
      I picked up a 2000 Big Bear 400 4X4 that was sitting around that I know nothing about. It will not start. I do have a red light when in reverse. When I take it out of reverse, I do not get a green neutral light, and when I push the start button the red oil light comes on but there are no noises, nothing else happens. How do I test the neutral switch and/or bypass it to see if I can get it to at least crank? And does anyone have other suggestions for me to try?
    • By Gwbarm
      I finally got around to working on the TRX, this has been an ongoing problem with this machine. This is a machine that we keep on my Fathers property, i dont see it that often, my brother haad it professionally repaired last year and year before same problem, the new starter gears and bypass gears last about a year and the machine is not used that often, he said he was done with it , so i thought i should go take a look. Sure enough the gears were all malled again. 
       

       

      IMG_4910.mov   There is some slack in there but most is taken up by the gear cover,if anyone with history with these machines has had the same problem, let me know your findings. Where i am now im looking for finding replacement honda gears on Ebay and try those. I suspect the original was replaced with aftermarket gears years ago and they just worse quality as the years go by. 
    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
×
×
  • Create New...