Quantcast
Jump to content

Recommended Posts

  • Ajmboy changed the title to Yamaha Big Bear 350 disconnect the Accelerator cable
Posted

You have to pull the cable up and around and take out the brass keeper then the cable will pull out of the carb, you will have to push the spring loaded half moon tensioner to the right to get slack to do this. Needlenose pliers are a great help.

IMG_3660.thumb.jpg.8a5005951e97e74cbf058f92eb519aa1.jpg ,

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Coyote251
      View File 2016 Can-Am Outlander 570, 650 & 850 L-Series service manual
      service manual - 2016 Can-Am Outlander L-Series
      2016 Can-Am Outlander 570, 650 & 850 Standard Series Here is combined the base manual along with all the needed updates and the 2016 supplement manual into one manual
      Submitter Coyote251 Submitted 01/03/2025 Category Can-Am BRP ATV  
    • By Wanheda
      Necesito ayuda para saber como puedo ajustar yo mismo el cable del acelerador de mi atv, esta nueva, recientemente lo lleve a su primer servicio y lo "arreglaron" pero ayer volvió a fallar, lo que pasa es que de la nada como que se afloja y por más que presione la palanca de aceleración nada más no avanza, he intentado repararlo y en ocasiones queda bien pero después le pasa lo mismo, y quisiera saber como funciona para poder repararlo ya que aun falta bastante para su siguiente servicio además de que para llevarla al servicio debo rentar una camioneta para llevarla ya que esta algo lejos el centro de servicio, así que por favor si me pueden ayudar, se los agradecería mucho 
    • By huntindog
      I am in the process of puting it back together after replacing the DPS gearbox.
      The manual I have states that it will need to be flashed by a dealer. Is this still true?
      Also , I have a mystery bolt That I cannot remember where it goes. M6x 70 or so.  Hex head with a flat washer.I will try to attach a pic.
      Pic is no go for now....Cox issue I will try again later
      TIA
    • By Am2007
      Hi everyone,
      Outlander 2006 400 XT i have replace the startor cover and right after i did that the oil light is on and not turn off, i check the wires and checked the oil level, everything seem to be normal quad is starting without any problem and rev just fine. i did not want to ride it since im not sure if it is faulty sensor or not so just be safe i did not let it run more the a minute or so. 
      I have read in the owner manual that i need to clean the oil strainer every 200hr unfortunately i never did that, my service manual that i have does not even indicate of such a thing. so i did some search around and it seem like canam split the manual into 3 parts
      owner manual
      service manual
      engine manual
      I have the first 2 but i can not find the last one, part number 219100232. If someone can guide me where do i find the oil strainer so i can clean it i will appreciate it.   im going to do an oil pressure test tomorrow to check how many PSI i have, just to make sure.
      Thanks
×
×
  • Create New...