Quantcast
Jump to content

Recommended Posts

Posted (edited)

Have you read the service manual ? Is the dash flashing ? Have you tried getting the trouble codes out of the dash ?

Are you sure the new battery is good, and fully charged ? Have you checked the charging is charging, and regulating ? Are you sure you didn't momentarily connect the battery up backwards, or try to jump start it but connect the jumpers backwards momentarily ?

When you say it won't shift gears in forwards, do you mean it moves but only in one gear, or that it won't go into any forwards gears ? Just to clarify before I start looking in the books.

And in reverse, it moves ? but the engine runs badly or just has no power ? If the motor is running ok, but has no power in reverse it might be a gearbox/control problem, or it might be an engine problem..

 

Edited by Mech
  • 5 months later...
Posted

Bummer when someone posts a question and members take the time to reply and the OP never shows up again.
Thanks @Mech for posting so much on the forums and helping others out. I am new here but looking forward to peruse the forums here and there and learn how to better service my own ATV from other people's problems and solutions and perhaps with time and more experience contribute back.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Ethan7387
      Hi could someone please help me, not to sure what engine this is 


    • By pastorjeep
      Ok guys, I am a glutton for punishment! I picked up this 01 2wd Rancher because the plastics looked good on the marketplace. It has been sitting in the guys back yard for 10 years. The original engine blew and they swapped in an electric shift 4x4 engine. 😒The engine is locked up and was full of water. The wiring is hacked where they tried to get it to run and the rear end needs new swingarm bearings where they left it laying on the ground in the woods for 10 years. Has anyone here ever did the engine swap? First thing is to straighten out the wiring and get the engine free to see if I can get it to crank over. I have swingarm bearings ordered and a new ignition switch. So hopefully I can at least roll it around soon. 🤣





    • By pastorjeep
      Just bought this machine for $250 thinking should be good for parts, but now I want to see if I can make it run and ride. It turns over with compression when I put power to the starter, so that made me want to try. It was flipped and then sold to a parts guy who hacked the wiring BAD and left to sit for several years. They tried to bypass everything on the ES by cutting the main power wires from the fuse box and running a new power wire to the dash and straight wiring the fan. It is crazy bad. I need a wiring diagram and will try to get power back to everything that should have it and then do the electric shift manual bypass. Right now it is missing the coil/wires, the dash and shift buttons/start switch is smashed, ignition wires are twisted together... Yeah, it is a mess. Pics to follow! Any help, ideas, manuals, pics, drawings, etc are welcome! 
    • By TimothyLindblom
      Hi everyone, I’m new here and new to 4 wheelers. Just got a Yamaha bear tracker 250 and joined here to see if I could get some help.
      The motor runs and it drives if it up on jackstands but if you get on and try to ride it, it starts to drive but then quits after a foot or two and dies out and won’t drive. The guy I got it from said he was running and using it shifting through all the gears great and he started it up the next day and it started this.
      He told me he thought it was the U joint on the driveshaft. He said it was probably worn and needed to be replaced.
      I just finished pulling the swing arm and rear end assembly to check out the U joint and there’s no play in it. It’s tight and not nearly enough play to be loose enough to not catch and go.
      Any ideas on what it could actually be?
      Thanks
      Timothy
×
×
  • Create New...