Quantcast
Jump to content

2014 CForce 500 4X4 issues

406offroad

By 406offroad
in CFMOTO ATV Forum

 Share

Recommended Posts

406offroad Apprentice

406offroad

Posted
Posted

I have a 2014 CForce 500. The front differential will not engage when the 4WD button is activated. You can hear the relay click when the button is pressed but the 4x4 doesn't engage.

In order to get to the actuator it appears that the front differential has to be partially removed to access the bottom bolt on the actuator. Before I start disassembly, does anyone know of a source for the replacement parts?

  • Ajmboy changed the title to 2014 CForce 500 4X4 issues
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • leecon
      WANTED service manual for a 2014 Titan UTV Scout E2.
      By leecon
      WANTED MAIN CONTROL BOX/BRAINS for a 2014 Titan UTV Scout E2.
    • fwsamm
      2001 Yamaha Bear Tracker Circuit Relay Issue
      By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
    • carkivey3
      2008 kazuma 800 4x4. i need wiring help. no spark
      By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • KSIM
      CFMOTO CFORCE 1000 CF1000AU/CF1000ATR Service Manual
      By KSIM
      View File CFMOTO CFORCE 1000 CF1000AU/CF1000ATR service manual
      cforce_1000_2018.pdf
      Submitter KSIM Submitted 03/08/2025 Category CFMOTO ATV  
    • KSIM
      CFMOTO CFORCE 520 CF500AU-7L/CF500AU-7S Service Manual
      By KSIM
      View File CFMOTO CFORCE 520 CF500AU-7L/CF500AU-7S service manual
      CFMOTO CFORCE 520 CF500AU-7L/CF500AU-7S service manual
      Submitter KSIM Submitted 03/08/2025 Category CFMOTO ATV  

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...