Quantcast
Jump to content

Recommended Posts

Posted

I have a new 2020 cforce 600 touring and read how smooth the shifting was on it. Mine however, sticks in gear quite often and only after moving the bike around does it finally shift. I use the brakes before shifting as it says but that doesn't seem to affect it either way. Anyone have this issue? Is there an adjustment on the linkage perhaps? Any suggestions are appreciated. The machine is new with about 10 miles on it.

  • 1 year later...
Posted
On 9/6/2020 at 5:57 AM, richard fischer said:

I have a new 2020 cforce 600 touring and read how smooth the shifting was on it. Mine however, sticks in gear quite often and only after moving the bike around does it finally shift. I use the brakes before shifting as it says but that doesn't seem to affect it either way. Anyone have this issue? Is there an adjustment on the linkage perhaps? Any suggestions are appreciated. The machine is new with about 10 miles on it.

I have the same problem with my new 2021 cforce 600 . the machine is new with 5 miles on it . Taking it back to the dealer ,didn't buy it to work on it .I hope they can solve the problem.

 

  • 4 weeks later...
Posted

I just purchased a 2021 600 Touring and today, with less than 10 miles, I experienced the gear shifter 'locking up'.  I also noticed when riding in H, the N light was illuminated...how?  It's in H, not Neutral (N).  In addition to the shifter issue, the 600 Touring also ran hot....mid-60s...still in 'break-in', running as instructed by manual and sales staff.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Randomnumber73
      I'm working on my uncles grizzly and it sparks once on initial cranking then no more after that. If I let off the start button then press the start button again it will spark once then stop sparking. I was wondering if anyone seen this issue before.  Also I've never used forums before so sorry if this question is in the wrong location.
    • By KSIM
      View File CFMOTO CFORCE 1000 CF1000AU/CF1000ATR service manual
      cforce_1000_2018.pdf
      Submitter KSIM Submitted 03/08/2025 Category CFMOTO ATV  
    • By KSIM
      View File CFMOTO CFORCE 520 CF500AU-7L/CF500AU-7S service manual
      CFMOTO CFORCE 520 CF500AU-7L/CF500AU-7S service manual
      Submitter KSIM Submitted 03/08/2025 Category CFMOTO ATV  
    • By nberga
      Hi,
      This weekend went on a trip with my all brand new cforce 1000 touring, went from tarmac to reach the small muddy places and dirt and even sand.
      Was running great until tre situations occurred:
      First, after putting 50km without problems and still respecting the break in on the engine, we came across a sand small uphill and just turned the 4x4, and almost reaching the top, got a strange loss of traction with a noise like something was slipping, the noise looked to came from the front but cannot give 100% sure it was the differential or not, but something was definitely slipping, also i disconnected the 4x4 and tried to make the uphill only rear traction and almost reaching the top the same noise. I got a friend that was on my old 850XC and it drove pass this small uphill almost at idle.....what do you think??? Belt Slipping, Front differential or Gearbox/CVT?
      Second, after this situation, i had the engine light going from on to off on the trail back home, but on the trail back home, i had no issues with temp rising nor noises nor anything, we drove normally, but without sand nor uphills, just rolling normally on dirt roads.
      Third, a strange situation, riding on normal mode, i was going at 38 to 40km rolling but the engine was revving on 4000rpm at those speeds, i feel that it was a little bit more reavs than usual for that speed, but this is my perception, what do you think on this???
       
       
×
×
  • Create New...