Quantcast
Jump to content

Recommended Posts

Posted

Does anyone have the cdi box wiring? I'm trying to hook up aftermarket cdinbox and i keep confusing myself with the trigger signal wire trigger ground wire and 12v. Any help would be appreciated thank you for your input 

Posted

96. And the 2 wires going to the pick up coil 1 is black and 1 is bk/y, what one of them is the actual signal wire and what one would be ground. Bk/y would be my ground and solid black would be the actual signal wire correct

Posted
96. And the 2 wires going to the pick up coil 1 is black and 1 is bk/y, what one of them is the actual signal wire and what one would be ground. Bk/y would be my ground and solid black would be the actual signal wire correct

I included a picture of the wiring. Have a browse.


Sent from my iPhone using Tapatalk

BY would be ground.


Sent from my iPhone using Tapatalk

  • Ajmboy changed the title to 1996 Kawasaki Mojave cdi box wiring

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hfrost112
      whats the best way to seal the bead on a tire
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By neilroy87
      I have a 1990 Bayou 220 that runs pretty well for it's age--needs a new muffler, but sounds tough.    Have had to start with a pull cord since I got it, and recently started troubleshooting the start button.  Finding a lot of information on this issue in the forum, but haven't been able to chase it down yet.  Got a new battery, new starter solenoid, and going to replace the starter relay this week, but not convinced that's going to do the trick, since I can't get the neutral light on when turning the key on.  I can start it by jumping the solenoid, but the 2 black wires to the relay do not activate the starter.  Bad ground or a short somewhere?  Is there a good way to just test the ground?
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...