Quantcast
Jump to content

2005 Suzuki Quadsport 50 Regulate Throttle

hornythrony

By hornythrony
in Suzuki ATV Forum

 Share

Recommended Posts

hornythrony Rookie

hornythrony

Posted
Posted

Does anyone know ways to regulate the speed etc other then the throttle screw? I have turn it almost all the way and it won't move on hills but keeps getting faster on flat gravel roads. I have a Chinese quad that's bigger but is a 3 gear so I just put it in first and let my kids go nuts cuz it might rattle it self to S... but it only goes so fast

  • Admin changed the title to 2005 Suzuki Quadsport 50 Regulate Throttle
MarkinAR Experienced

MarkinAR

Posted
Posted

The thumb throttle adjustment is the only "legit" way to limit speed.  Yes, it does get faster on flat ground, up to the speed corresponding to thumb position and it may even go beyond that down hill.  I would think even if there were an adjustable rev limiter in the CDI it would still behave the same uphill and flat ground.  The only way that i see to not have it slow uphill and fast downhill would be a speedometer limited throttle like a modern vehicle so that it will only do say 15mph uphill and 15mph downhill/flat ground.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Rich1028
      I Crashed My Quad
      By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • BuckBilly
      Where you like to ride and what riding does for you?
      By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • P_syko
      Hello all!
      By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
    • Sportsman500guy
      1996 Polaris Sportsman 500 4x4 Issues with high gear
      By Sportsman500guy
      I bought a 1996 Sportsman 500 4x4 about a month ago, and I love it. Unfortunately, I've been experiencing a few problems with the high-range gear. The first problem is that the gear selector will intermittently pop out of high and into neutral. This problem will sometimes occur when starting from a stop and sometimes will also occur while at cruising speed. The last time this happened I stopped and put it back into gear, however, as soon as I tried to throttle the machine would die. I turned it on again with no problems put it back into high and it died again. Once again I turned it on with no problems put it into low instead and it worked fine with no problem. I drove in low down the road slowly for a little and then shifted back into high with no issues. 
         I plan on working on it this weekend and would just like some opinions or feedback from anyone who may have experienced these problems before. I'm very mechanically inclined but im unsure of exactly where to start as this is the first Polaris ATV that I've owned. Any feedback is appreciated and thanks in advance  
    • Ethan7387
      Quad engine
      By Ethan7387
      Hi could someone please help me, not to sure what engine this is 


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...