Quantcast
Jump to content

Recommended Posts

Posted

Looking for a guru to help me get the top end back together. I'm stumped!! There seems to be an issue with the removable chain guide on the left hand side. In its current position (which is probably incorrect) there's not enough clearance to get the chain on the sprocket and be able to line up the timing. Does the guide rest on the side or is it supposed to be in the notch underneath? I have a manual, but it doesn't show the correct positioning on that guide. I tried to fit it in the notch, but then the cylinder head doesn't seem to seat properly. Let me know if you need pictures. Any help (and pictures) you able to provide will be greatly appreciated.

Thanks in advance!!

Jay in WI

Posted

If it's like the 93 Kodiak I had apart recently, there is a valley at the bottom of the front (not adjusting) the timing chain guide goes in to.  The top of that adjuster just kind of "sticks up" into the rocker cover.  It seems that I got the front guide in a bind and noticed that it touched the chain so it sounds like you've done that also.  Just have to get it seated right, may have to lift and lower the head a dozen times and then it just magically sits down cleanly.

Posted

Here are two pictures. If you look at the lower left corner of the sprocket (I know that circles don't have corners), you'll see the top of the black chain guide. Is it suppose to tuck into that little "pocket" in the cylinder head? I tried that once, but then the cylinder head wouldn't seat. What do you all think?

Thanks!

IMG_2030.jpg

IMG_2029.jpg

Posted

Looks fairly normal to me. As long as the bottom sits in its groove the top is just suspended. The kodiak I had apart you could flick the forward guide forward and backward a bit with the chain tensioner out. 

Posted

I got it! It did go in that pocket in the cylinder head. MarkinAR commented that you just need to keep lifting the cylinder head up and down until that guide sits in the correct position and then everything fits together. Wow, what a relief!!

Thanks to everyone for their input,

Jay

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By hfrost112
      whats the best way to seal the bead on a tire
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
×
×
  • Create New...