Quantcast
Jump to content

Recommended Posts

  • 1 year later...
Posted

Many led bulbs will work however the stock bulbs are usually wired direct from the stator which provides alternating current and is very noticeable with led bulbs. When switching to led bulbs it is recommended to wire the headlights to direct power from the battery, this is best done with a relay off the ignition so the lights will not drain the battery

  • 1 year later...
Posted

For our 2014 Polaris outlaw 90 I just bought leds from ebay that was the correct size. Then I soldered the two metal connection points to make it one. The factory bulb only has one metal connection point,  the LED has two...high & low beam, solder them so both are on and also allows the factory connection points of the bulb wiring to actually connect correctly to the led bulb connection points ( end ).

Screenshot_20230102-204755.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...