Quantcast
Jump to content

Recommended Posts

Posted

This is more of an informational fix I wanted to share..

My Grizzly has been getting harder and harder to shift this winter and today was completely stuck and I needed to plow the few inches that came down this morning. First thought...oh no, tranny...but it’s winter and maybe it’s iced up. I pulled off the plastic to see what was going on and indeed I did find the drain tube iced up. 

I took the blow dryer out and de-iced it. Quick fix, I never really thought about the shifter drain tube icing up before, shifts like new!

Yamaha Grizzly Frozen Shifter

Grizzly Frozen Shifter

Yamaha Grizzly Stuck Shifter

FA04AC3B-4FB0-4764-AFD9-1492F5CC790B.MOV

  • Like 1
Posted
7 hours ago, Frank Angerano said:

That’s a great find and fix. Thank goodness not a tranny! What’s the moisture from, condensation? And where does that line go to ? 

You know I'm not sure really, I'm assuming snow got in there and I left it out in the rain a few times before the winter. That line is just a drain and has a plug at the end of it. I think its just there to hold any water/condensation or if you submerge it to drain the shifter box I guess. But that tube had ice in it because the quad sits in my garage outside with no heat. Yeah I'm glad it wasn't a major issue, I need this thing to keep going until I can get a new quad down the road. 💵

  • Like 1
Posted
2 hours ago, JacobSlabach said:

just wondering @Ajmboy,  do you do much with polaris, and if so, how do you like/dislike each brand of bike? (the utility model ex:  Sportman or magnum vs grizzly or kodiak)  

Honestly, I don't do anything with polaris and I used to be a bit turned off by polaris atvs in general because two of my buddies had an Xplorer and Sportsman 600 I think and although nice quads, they just couldn't take the beating our grizzlys, hondas, kodiak, and king quads could. Both of them had issues with front suspension and axles I recall and one had a speedo issue. But its not really fair because that was like 10 years ago and today they seem much better. I haven't ridden one in a while so I can't really give you an opinion.  I'm biased because I've only owned Kawasaki, Suzuki, and Yamaha ATVs like Bayou, Warrior, Kodiak, King Quad, and Grizzly

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • By Randomnumber73
      I'm working on my uncles grizzly and it sparks once on initial cranking then no more after that. If I let off the start button then press the start button again it will spark once then stop sparking. I was wondering if anyone seen this issue before.  Also I've never used forums before so sorry if this question is in the wrong location.
    • By leecon
      WANTED MAIN CONTROL BOX/BRAINS for a 2014 Titan UTV Scout E2.
×
×
  • Create New...