Quantcast
Jump to content

Recommended Posts

Posted

Great pics! Looks like the fall is a good time to ride there. We are def going back. We have to finish the place since we didn’t do it all.   I can’t begin to explain how many people were there and they all seem to be responsible people.   We seen that same view of the train in that same spot. Great place to stop and tape it all in. The mud pits and water holes were a blast. 

5F904AB4-A815-4508-B865-CC9BE867D76B.png

  • Like 1
Posted
20 hours ago, Frank Angerano said:

That’s some great stuff @mikeexplorer so you have obviously ridden there. How is it ?  How far is that from where we rode this weekend? (Lost trails)

it looks like a good place to check out.  

 

The pictures of planes 10 and 11 are the Lost Trails park. The other areas I photographed, I did on foot. Most of my abandoned railroad pictures are done by hiking.

Some of the pictures go back to 2004, many years before it became the park.

Mike

 

Posted

I have a really old helmet style camera that still works. Remote lens is wired back to the main unit. Main unit also has a lens with a 10x optical zoom.

I still use it since I ski, the main unit that has the battery stays warm inside my jacket. A few videos I made of the park:

 

 

Posted

This video is their technical (rocky, ungroomed) trails. What is called 20-J,20-I is now called trail 28 and upper half has been groomed out.

First part of trail 10 is now trail 12 and groomed, once you turn on the bridge, it is ungroomed and becomes trail 10 again.

Trail 22 was partially groomed, the large rock area in the washout was plowed, still very technical, but no longer as intense as video shows.

 

Posted

You can cover all the trails in one day

 

Mike

 

22 hours ago, Frank Angerano said:

Very cool.  It looks very different in what I’m assuming is the end of the summer ? 

I def want to get back and finish the place off. 

Yes, June & July almost 6 years ago, that is why some of the trail numbers changed.

 

Posted

Replace all fluids first. Before you start it, make sure it turns freely. Then drain the gas and replace. Next. Put a new plug in it. Anything after that we can help.

Sent from my SM-N920V using Tapatalk

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By oxidized_black
      these are what i have in my collection ... always looking for more
      1985 - 1990 Suzuki LT230 & LT250 service manual
      https://www.quadcrazy.com/files/file/532-1985-90-suzuki-quadrunner-lt230-service-manual/
      1987 - 1998 Suzuki Quad Runner 250 & King Quad 280 service manual
      https://www.quadcrazy.com/files/file/268-quad-runner-250-king-quad-1987-1998-service-manual/
      1987 - 2006 Suzuki LT80 service manual
      https://www.quadcrazy.com/files/file/89-1987-2006-suzuki-lt80-service-manual/
      1987 Suzuki LT500R Quadzilla service manual
      1988 - 1992 Suzuki LT250R Porting Instruction
      https://www.quadcrazy.com/files/file/90-1988-1992-suzuki-lt250r-porting-instructions-manual/
      1988 - 1992 Suzuki LT250R Quadracer service manual
      https://www.quadcrazy.com/files/file/91-1988-1992-suzuki-lt250r-quadracer-service-manual/
      1988 - 1992 Suzuki LT250R Tuning Guide Instruction
      https://www.quadcrazy.com/files/file/92-1988-1992-suzuki-lt250r-tuning-guide-instructions/
      1999 - 2004 Suzuki King Quad 300 service manual
      2002 - 2007 Suzuki 500LTA service manual
      2002 - 2009 Suzuki LTF250 Ozark service manual
      https://www.quadcrazy.com/files/file/94-2002-2009-suzuki-ltf250-ozark-service-manual/
      2003 Suzuki LTZ400 service manual
      2006 Suzuki 50LTZ Quad Sport service manual
      2004 Suzuki 250LTZ Quad Sport service manual
      2005 Suzuki LTA700 King Quad service manual
      2007 Suzuki 90LTZ Quad Sport service manual
      https://www.quadcrazy.com/files/file/97-2007-suzuki-90ltz-quadsport-service-manualpdf/
      2008 Suzuki 400FLTF King Quad service manual
      https://www.quadcrazy.com/files/file/98-2008-suzuki-400fltf-kingquad-service-manual/
      2008 Suzuki 750 King Quad service manual
      https://www.quadcrazy.com/files/file/99-2008-suzuki-750-kingquad-service-manual/
      2009 Suzuki 400LTZ Quad Sport service manual
      https://www.quadcrazy.com/files/file/100-2009-suzuki-400ltz-quadsport-service-manual/
       
      ALSO CHECK SUZUKI ATV SERVICE MANUAL DOWNLOADS
      Please visit the downloads section for ATV manuals at https://www.quadcrazy.com/files/
      Also available at:
      Get 15% at emanualsonline.com with coupon code EMOAFF
      Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
    • By KdlH
      Hello.
      I'm new to the forum, I live in the UK. I have just bought a 1995 Yamaha Moto 4 350.
      Generally the condition isn't too bad (I paid very little for it!), it looks quite original and all the plastics are quite good. The bad bits are no brakes, the rear axle bearings are shot and the transmission won't shift through the gears properly.
      I'm not planning on a full rebuild but I would like to sort it out a bit. The transmission is my main concern. If anyone has any ideas on what might be the cause I would be grateful. I can explain what's happening in more detail if required.
      Thanks everyone,
      Kester
       



×
×
  • Create New...