Quantcast
Jump to content

Recommended Posts

Posted

I have an old 400ex that needs the top end rebuilt, Does anyone have any real life experience with the cheaper ebay or amazon top end kits. I know most will probably say to stay away from them.   I dont have a lot of money into this bike and it isnt worth putting a whole lot into is why i ask.   It doesnt get raced or road hard, my son and i just drive around the fields.  thanks for any help

Posted

I purchased a cheap piston, rings, and gasket kit from ebay last year for my Suzuki King Quad 300. I was very skeptical when purchasing but so far I am very impressed with the results- the brand I used was Namura. I have only put about 100 miles on it since the top end rebuild and have had zero problems what so ever, and I have to admit that I probably take it too far when riding my quad and beat it very hard sometimes. The reason I replaced the original piston and rings was because it was burning oil and smoking badly, the new top end parts fixed this problem and has run like a top ever since! One thing I would recommend is to check ratings on the product itself and if possible on the seller.

  • Like 1
Posted

Well i ordered a kit, hopefully it will work out. Ill post a review next week after i get it installed

 

What about break-in procedures after a new kit. Any suggestions. Seems like there are lots of mixed feeling on this subject when i search the net

Posted

Heres what I did- Don’t forget to hone the cylinder. Use lots of assembly lube. Before first start take out spark plug and turn engine over a few seconds to get oil flowing around a bit. Start it and let it idle for 30ish seconds, then rev it keep the rmps varying but not too high. This is so that the rings seat properly. And you need the variations to mimic the kind of conditions it will be facing while you ride- constantly changing rpms. Once it seems to be pretty well warmed up to regular operating temperature or you feel it has run long enough, let it cool down completely. Repeat the rev/cooling process 2 more times. Once you are ready to ride take it easy for the first 10 miles or so. Check all nuts/bolts periodically through this process. Hope this helps. The kit may come with recommended instructions also.

  • Like 3
  • 4 weeks later...
  • 3 weeks later...
Posted

Ive only used the cheap Chinese carbs on a honda recon and they work well for a couple days then begin to fall apart, leak gas, etc. and the quad begins to run like garbage. The body does not hold up well either, the threads on the throttle cable strip out and cause the slide to pull up so the engine runs on full rpm, has caused a number of accidents including rollovers on this particular 4 wheeler. We ended up using parts like the floats and jets to fix up the original carb body, but it’s probably more advisable to rebuild it.

Posted
On ‎11‎/‎14‎/‎2018 at 10:56 AM, shane mcguffie said:

just stay away from wiesco, i can vouch for the namura top end kits but the wiesco pistons are horrible in my opinion, they like to heat seize and expand alot faster then stock. 

They do swell. This is why a meticulous break in is needed with a Wiseco. Personnaly I like stock (cast) pistons.

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Trent Finnessey
      I’ve got a 2000 400ex with a dg slip on muffler, it came with he stock muffler on it but the previous owner had the dg in a box so I put it on. I’ve been riding it for the past month and a half and every time I let off it backfires, and the other day the backfires got way louder, 2x louder! I’m concerned that I may hurt my motor? Why does is backfire??? Thanks
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
×
×
  • Create New...