Quantcast
Jump to content

Recommended Posts

  • 2 weeks later...
Posted

yes as far as I can tell it is. still trying to find something but I can put fuek in intake and will fire up, tested fuel pump it will run. at same time I tried it my display for dash quit also. it lights up yellow but nothing else

 

Posted

yes I unplugged fuel pump ran power directly to pump and it turned on. still testing things and found a relay call ignition/starter relay. It doesn't seem to have any 12 volt power to any of the wires for it

Posted

Have you checked all the fuses? 

You will probably have to get out the wiring schematic and start tracing the power and see what is causing the problem. One of my customers had the same machine and the voltage regulator / rectifier was bad and cooked the battery it was doing similar issues. 

Posted

Haha that is funny you posted this. I was just out going through wiring and came to regulator/rectifier plug. It was melted on 2of the 3 wires. I was just about to ask if this may cause dash not to display and fuel pump to not run.

  • Like 1
  • Ajmboy changed the title to 2004 Suzuki King Quad 700 Fuel Pump Does Not Turn On
Posted

Just saw this topic, I used to have a 2004 KIng Quad. Was going to say that you definitely have an electrical issue if you can bypass and get the fuel pump to work. These quads have more electrical with the fuel injection and all than older quads. Fix those melted wires and try to find out what may have caused it. You may need to replace the regulator/rectifier.

* Topic title adjusted to include ATV issue

Posted

hey @AjmboyI seen a post where you were wondering on recalls for 2005 king quads. mine is an 05 made mistake in my post said 04. Did you find out on recalls. Btw I am going to clean up wires and trace them see if there is a bad spot. Thanks for input

 

  • Admin changed the title to 2005 Suzuki King Quad 700 Fuel Pump Does Not Turn On
Posted
1 hour ago, Cory Macleod said:

hey @AjmboyI seen a post where you were wondering on recalls for 2005 king quads. mine is an 05 made mistake in my post said 04. Did you find out on recalls. Btw I am going to clean up wires and trace them see if there is a bad spot. Thanks for input

 

I don't remember but saw something somewhere and would search online and on a quick google search I found https://www.cpsc.gov/Recalls/2005/cpsc-american-suzuki-motor-corp-announce-recall-of-2005-king-quad-all-terrain-vehicles

I changed your topic title to include the correct 2005 year 😉

EDIT, here is @Ajmboy's topic

 

 

Posted

Boy that's an old topic...lol. I don't recall (no pun intended) the recalls on the king quad I had back in the day except for the ecu which I never had done and ended up selling it anyway.

Posted
On 10/2/2018 at 7:12 PM, Cory Macleod said:

Hey guys thanks for all the help. A pile of evenings later and it up and running. Was a tiny wire broke off at a junction

Glad you fixed it and thanks for letting us know!

  • 2 weeks later...
Posted
On ‎10‎/‎2‎/‎2018 at 7:12 PM, Cory Macleod said:

Hey guys thanks for all the help. A pile of evenings later and it up and running. Was a tiny wire broke off at a junction

Hey man im having the exact same issue on the same quad! Can you tell me about where the tiny wire was located? (im not much of a mechanic so laymens terms please!)

Posted

I can later today. I know it was red wires with green tracer. It was located on the pull cord side behind side cover in the mass of wires that are taped together. I believe one went to fuel pump one to the dash or up front forsure. One to cpu and forget where other went. Maybe to fuses. Hope this helps and if you can’t find them let me know and I can send some pics to you when I get near machine later today

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...