Quantcast
Jump to content

Recommended Posts

Posted

Hey all, new to the forum here and ATV's in general and looking for some help.

Was doing some riding today, nothing major, just around the farm, when all of a sudden my electric start stopped working on me. Thought that was really weird but I pull started it and kept going. Then all of a sudden about 25 min later I lost all electrical power all together and was stranded. Could this be just the battery??? I am thankful for whatever info you can throw my way.

Posted (edited)
53 minutes ago, Logan West said:

Hey all, new to the forum here and ATV's in general and looking for some help.

Was doing some riding today, nothing major, just around the farm, when all of a sudden my electric start stopped working on me. Thought that was really weird but I pull started it and kept going. Then all of a sudden about 25 min later I lost all electrical power all together and was stranded. Could this be just the battery??? I am thankful for whatever info you can throw my way.

Could be the battery, might have not had enough juice to crank the starter and then just completely ran out of charge. The easiest way to test that is to charge the battery and then see if it starts or jump it with a 12v starter pack or jumper cables. If it starts, its the battery. If not, you may have an electrical problem.

Edited by quadmaniac
Posted
1 minute ago, quadmaniac said:

Could be the battery, might have not had enough juice to crank the starter and then just completely ran out of charge. The easiest way to test that is to charge the battery and then see if it starts or jump it with a 12v starter pack or jumper cables. If it starts, its the battery. If not, you may have an electrical problem.

Could it be the stator? I've read that those dont fail often but when they do they give no warning. Also, it is unable to start at all, not even pull start, is that normal?

Posted

Bayou 300 need a full charge on the battery. Even to pull start it From my experience. And there is a 30 amp fuse under the seat. First charge/test that battery the main fuse should be right by the battery. After those confirm OK if the bike still doesn't work. Get an electrical schematic and start chasing wires it really sounds like a ground of some sort. To lose everything on a working bike out of nowhere seems like a fuse or ground and maybe the battery is dead. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...