Quantcast
Jump to content

Recommended Posts

Posted

Hi All,

I have an 87 lt4wd quadrunner 250 and the choke cable is not there, speedo is frozen, left brake handle is frozen, right brake handle and reservoir is missing but runs good and all gearing works. I'm starting with the choke install. I have the manual downloaded and printed (472pgs) It is hard to see. Any help is welcome, the first thing I did was oil and filter with front diff oil change coming up soon.

Thanks

RUSTY

suz front.jpg

suz rear.jpg

suz right.jpg

suz side.jpg

  • Like 3
  • 4 weeks later...
Posted

I have a twin of this that I use for parts, that will work on a 1988 LT-F250  2WD . Any thing that is unique to the 4WD may be available. ie choke cable, carb etc. I have the from brake master cylinder and handle complete front driveline, short of the rt ft inboard drive axle, I will keep the engine top half but the complete gear case and engine lower unit will become available. As I said though anything that ill work on my 2 wheel I plan on keeping. 

  Let me know if any of this is feasible for you.

Hope it works out for you.

Tim. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
    • By Gwbarm
      I finally got around to working on the TRX, this has been an ongoing problem with this machine. This is a machine that we keep on my Fathers property, i dont see it that often, my brother haad it professionally repaired last year and year before same problem, the new starter gears and bypass gears last about a year and the machine is not used that often, he said he was done with it , so i thought i should go take a look. Sure enough the gears were all malled again. 
       

       

      IMG_4910.mov   There is some slack in there but most is taken up by the gear cover,if anyone with history with these machines has had the same problem, let me know your findings. Where i am now im looking for finding replacement honda gears on Ebay and try those. I suspect the original was replaced with aftermarket gears years ago and they just worse quality as the years go by. 
    • By TimothyLindblom
      Hi everyone, I’m new here and new to 4 wheelers. Just got a Yamaha bear tracker 250 and joined here to see if I could get some help.
      The motor runs and it drives if it up on jackstands but if you get on and try to ride it, it starts to drive but then quits after a foot or two and dies out and won’t drive. The guy I got it from said he was running and using it shifting through all the gears great and he started it up the next day and it started this.
      He told me he thought it was the U joint on the driveshaft. He said it was probably worn and needed to be replaced.
      I just finished pulling the swing arm and rear end assembly to check out the U joint and there’s no play in it. It’s tight and not nearly enough play to be loose enough to not catch and go.
      Any ideas on what it could actually be?
      Thanks
      Timothy
    • By Need-help-with-quads
      So my moto 4 is smoking white smoke and when I go to first gear and get about half throttle there’s no power and it sounds like it’s bogging
×
×
  • Create New...