Quantcast
Jump to content

Recommended Posts

Posted

I just bought a Used Kodiak, that I will be using mainly for Ice fishing, and it ran fine at the guys house started right up and everything seemed fine.

I Got home and Hopped on to take it off the trailer, i Pressed the brake and hit the button and it turned over, fired up and then dies. (it starts cold so I was not concerned.)

When I hit the electric start again there was no noise or anything, Just the coolant indicator light illuminates when ever I hit the button. I cycled through the shifter (park, reverse neutral, and drive,.) and then hit the button again, with the same result.

I noticed the park light does not illuminate, but the reverse and Neutral do.

I tried starting it in Neutral, and again nothing it just illuminates the coolant light.

SO am I doing something wrong?

I finally put it in neutral and pushed it off the trailer, and started googling. I have not seen anything on this being a problem or even what it would indicate. Any help appreciated.

  • 2 weeks later...
Posted

I went from full normal cranking to NO cranking, or clicking

The lights come on, and are not Dim. I will see if the voltage drops on the battery when i try and star it, when I get home, Friday or sat.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...
    • By mans
      Were is the neutral safety switch on 03' Kodiak 400 4x4 . How xan i check it to see if it's good for a no neutral light no power to machine. Ty
×
×
  • Create New...